Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces

The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.

220px-Tapered-roller-bearing_din720_120.png           220px-Tapered-roller-bearing_din720_ex.png

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

Tapered roller bearings are separable into a cone assembly and a cup. The non-separable cone assembly consists of the inner ring, the rollers, and a cage that retains & evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.


In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.

Pairs of tapered roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces. Tapered roller bearings are commonly used for moderate speed, heavy duty applications where durability is required. Common real world applications are in agriculture, construction and mining equipment, sports robot combat, axle systems, gear box, engine motors and reducers, propeller shaft, railroad axle-box, differential, wind turbines, etc.

Inch Tapered Roller Bearings

Dimension and Parameters
Request Quotation
Inch Tapered Roller Bearings Inch Tapered Roller Bearings
  • Bearing No
  • Inner Ring :
  • Outer Ring :
  • Dimension(mm)
  • d :
  • D :
  • T :
  • B :
  • C :
  • Rmin :
  • rmin :
  • Rated load(KN)
  • Dynamic Cr :
  • Static Cor :
  • Limiting speed
  • Grease :
  • Oil :
  • Type
  • ≈ :